Programming

 

Segment 2 (Wash)

 

 

Display

Instructions

 

Use Up or Down key to change. Press Start key to enter or advance.

 

 

 

UASH

 

 

 

00 or 02 to 20

Select segment time: 02 to 20 minutes (00 to skip segment).

 

 

tFIL

Indicates temperature fill is enabled.*

 

 

HFIL, CFIL, bFIL,

Select “HFIL” (hot fill), “CFIL” (cold fill), “bFIL” (warm fill), or “AFIL”

or AFIL

(auxiliary fill).**

 

 

LO, Med, or HI

Select fill level: “LO” (low), “Med” (medium), or “HI” (high) water level.

 

 

SUP0–SUP7

Select supply 0 – 7 (0 for no supply).***

 

 

00°F, 75°F–200°F

Select temperature: 75 to 200° F or 25 to 93° C (00 for no heat).†

00°C, 25°C–93°C

 

 

 

drAI or nodr

Select drain option: “drAI” (drain), “nodr” (no drain)‡

 

 

SPIn (flashed for one second)

tIME (flashed for one second)

00 or 30 to 240

Select time for spin: 30 to 240 seconds (00 for no spin)

 

 

*This is displayed only if temperature-controlled fills are enabled in the SETUP options and if the heat temperature is set to a value other than “00.”

**“AFIL” can be selected only if the “SUP5”/“AFIL” SETUP option is set to “AFIL.”

***“SUP5” and “SUP6” can be selected only if the “SUP5”/“AFIL” SETUP option is set to “SUP5.”

†This value is not available when temperature-controlled fill and auxiliary heat SETUP options are disabled.

‡ If “nodr” is selected, the computer skips the spin step and goes on to the next segment.

F232072

33