Safety
Cycle Execution (Continued)
If the machine is connected to an external chemical supply system, the programmed supply will begin 10 seconds into the fill. The supply will remain on until the programmed water level is reached, or until 60 seconds have elapsed, whichever happens first.
If the computer does not receive a signal that water level has been attained within 30 minutes, it will alternately flash “STOP” and “FILL” and sound the
Wash
Standard Wash
As soon as water level is reached (and any programmed temperature is reached), the displayed time begins counting down at
All but three cycles use the standard wash agitation. This agitation repeats for the first programmed time duration in the prewash, wash, and fill segments.
The standard wash agitation sequence:
l12 seconds counterclockwise at wash speed
lA
l12 seconds clockwise at wash speed
lA
Note: While a cycle is in progress, pressing and holding the Start key will cause the current cycle number to be displayed. Pressing and holding the Up key while a cycle is running will display the temperature inside the sump.
Gentle Wash
Cycles 8, 16, and 24 use a gentle wash agitation in place of the standard wash agitation. This agitation repeats for the programmed segment time duration in the prewash, wash, and fill segments.
The gentle wash agitation sequence:
l3 seconds counterclockwise at wash speed
lA
l3 seconds clockwise at wash speed
lA
Heat
If the segment contains a heat step, the machine begins heating after the water has reached the programmed level.
Note: If the water does not reach the programmed temperature in 30 minutes, the computer progresses to the wash step.
18 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232073 |