Drain
At the conclusion of a spin, the drain valve opens, and the cylinder turns counterclockwise (forward) at wash speed. This counterclockwise direction mirrors the spin rotation direction and is, therefore, considered forward.
Note: The machine should drain in 30 seconds. If the machine fails to drain, contact a qualified service technician.
When the water level falls below the low level, there is a
Spin
After the drain sequence ends, the speed of the cylinder increases to the extract speed if the programmed spin time is not zero. The displayed time resumes counting down at
After the programmed spin time has elapsed, the computer moves on to the fill step in the next segment of the cycle. If the spin is at the end of the cycle, the computer begins the stop routine.
Safety
Stop Routine
When the programmed duration for the machine’s final spin expires, the computer begins the stop routine.
The stop routine sequence:
lAll inputs are turned off.
lA
l12 seconds counterclockwise at wash speed (if stop routine is not preceded by a spin)
lA
l12 seconds clockwise at wash speed
lA
lThe display shows “donE.”
lThe door interlock is energized, allowing the door to be opened
.
:$51,1*
NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury.
SW012
Once “donE” is displayed, open the door by pressing and holding the door unlock button as described earlier. Once the door is opened, the computer display will show the most recent cycle number.
The machine is now ready to begin another wash cycle.
F232073 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 19 |