Panasonic SC-NE5 Listening to the radio, Preparation, Presetting stations automatically

Listening to the radio

You can preset up to 30 channels.

Preparation

≥Make sure that the FM antenna is connected. (l 8)

≥Turn this system on.

≥Press [CD/RADIO] to select “FM”.

A station previously stored is overwritten when another station is stored in the same channel preset.

Presetting stations automatically

1 Press [PLAY MENU] to select “A.PRESET”.

2 Press [3, 4] to select “LOWEST” or “CURRENT” and then press [OK].

LOWEST:

To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5).

CURRENT:

To begin auto preset with the current frequency.*

*To change the frequency, refer to “Manual tuning and presetting”.

The tuner starts to preset all the stations it can receive into the channels in ascending order.

Listening to a preset channel

Preparation

1Press [PLAY MENU] repeatedly to select “TUNEMODE”.

2Press [3, 4] to select “PRESET” and then press [OK].

Press [:/6] or [5/9] to select the channel.

∫Manual tuning and presetting

Select a radio broadcast.

1	Press [PLAY MENU] repeatedly to select
	“TUNEMODE”.
2	Press [3, 4] to select “MANUAL” and then
	press [OK].
3	Press [:/6] or [5/9] to tune to the
	required station.
	≥ To start automatic tuning, press and hold [:/6],	ENGLISH
	[5/9] until the frequency starts scrolling. Tuning
	stops when a station is found.
To preset the channel
4	While listening to the radio broadcast
	Press [OK].
5	Press [3, 4] to select the channel and then
	press [OK].

∫To improve FM sound quality

1While receiving FM broadcasts, press [PLAY MENU] repeatedly to select “FM MODE”.

2Press [3, 4] to select “MONO” and then press [OK].

≥This setting can be preset and memorized. To do so, continue to step 4 of “Manual tuning and presetting”.

≥Select “STEREO” in step 2 to return to stereo broadcasts.

≥“MONO” is canceled if the frequency is changed.

≥If “MONO” is selected, regardless of the type of signal this

system is receiving, “FM MONO” is displayed when [DISPLAY, iPod MENU] is pressed. (l below)

∫To display the current signal status

Press [DISPLAY, iPod MENU].

“FM ST”:	The FM signal is in stereo.
“FM”:	The FM signal is in monaural.

≥“FM” is also displayed even if this system is not tuned to a station.

≥“STEREO” is displayed when this system tunes to a stereo broadcast.

19

(ENG) VQT4U55