≥The CD unit’s display turns off if the CD unit is left unused for more than 3 minutes and the audio selector is set to an option other than “CD”, “IPOD_DOCK”, or “IPOD_PORT”. To turn the display on, press any button on the CD unit, or select “CD”, “IPOD_DOCK”, or “IPOD_PORT” as an audio source.
≥Placing the CD unit and the speaker unit:
–Keep a minimum distance of 1 cm (3/8q) between the CD unit and the speaker unit when placing them.
–The distance between the CD unit and the speaker unit should be a maximum of 10 m (33 ft). The range can decrease depending on the environment, obstacles or interference.
–This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this system is located too close to the devices that use the 2.4 GHz band.
–This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.
–Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc).
ENGLISH
∫Remote control
SLEEP DIMMER
|
| AUX |
iPod | CD/ |
|
RADIO |
| |
| VOL | VOL |
SETUP |
| MUTE |
iPod MENU SOUND PLAY MENU DISPLAY
OK
1Turn this system on or off
2Select the audio source
[iPod] : “IPOD_DOCK” ,. “IPOD_PORT”
[CD/RADIO] : “CD” ,. “FM”
[ , AUX] : “BLUETOOTH” ,. “AUX”
3Basic playback control buttons
4Enter setup menu
5Enter the iPod/iPhone menu / Change displayed information
6Set the sleep timer
7Change the brightness of the display panel
≥Press to dim the display panel. Press again to cancel.
8Adjust the volume (0 (min) to 50 (max))
9Mute the sound
Mutes the sound. Press again to cancel. “MUTE” is also canceled when the volume is adjusted or this system is turned off.
10Enter playback menu
11Enter sound menu
12Selection/OK
∫Before using for the first time
Remove the insulation sheet A.
∫To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥Set the
≥Keep the
7
(ENG) VQT4U55