Bluetooth® operations
By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly.
≥Refer to the operating instructions of the Bluetooth® device for details.
Pairing Bluetooth® devices
Preparation
≥Turn on the Bluetooth® feature of the device and place the device near the speaker unit.
≥If this system is already connected to a Bluetooth® device, disconnect it.
1 Press [
, AUX] to select “BLUETOOTH”.
≥If “PAIRING” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “NEW DEV.” and then press [OK].
{.“PAIRING” is indicated on the display.
3 Select
4 Start play on the Bluetooth® device.
≥If prompted for the passkey, input “0000”.
≥You can register up to 8 devices with this system. If a 9th device is paired, the device that has not been used for the longest time will be replaced.
Connecting a paired Bluetooth® device
Preparation
≥Turn on the Bluetooth® feature of the device and place the device near the speaker unit.
≥If this system is already connected to a Bluetooth® device, disconnect it.
1 Press [
, AUX] to select “BLUETOOTH”.
{.“READY” is indicated on the display.
2 Select
{.The name of the connected device is indicated on the display for 2 seconds.
3 Start play on the Bluetooth® device.
≥This system can only be connected to one device at a time.
≥When “BLUETOOTH” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device.
≥The Bluetooth® device will be disconnected if a different audio source (e.g., [CD]) is selected.
Bluetooth® transmission mode
You can change the transmission speed to prioritize transmission quality or sound quality.
Preparation
≥Press [
, AUX] to select “BLUETOOTH”.
≥If a Bluetooth® device is already connected, disconnect it.
1 Press [PLAY MENU] repeatedly to select “LINK MODE”.
2 Press [3, 4] to select the mode and then press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
≥The default setting is “MODE 1”.
Bluetooth® input level
If the sound input level of the Bluetooth® transmission is too low, change the input level setting.
Preparation
≥Connect a Bluetooth® device.
1 Press [PLAY MENU] repeatedly to select “INPUT LEVEL”.
2 Press [3, 4] to select the level and then press [OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
J | |
|
|
≥Select “LEVEL 0” if the sound is distorted.
≥The default setting is “LEVEL 0”.
Disconnecting a Bluetooth® device
1 While a Bluetooth® device is connected: Press [PLAY MENU] to select “DISCONNECT?”.
2 Press [3, 4] to select “OK? YES” and then press [OK].
16
VQT4U55 (ENG)
