
Installation
4.Remove four front panel screws. Refer to Figure 6. Keep door hinge cams in place on door hinge lug. Pull lug and door assembly off as one piece. Refer to Figure 7.
5.Remove remaining front panel screws. four on the top and four on the bottom. Refer to Figure 6. Disconnect door switch harness from switch. Take off front panel. Refer to Figure 7.
6.Exchange switch and plug locations. Depress tabs with an adjustable pliers to remove plug and switch from front panel. Reinstall switch, orienting button toward center of machine. Reinstall plug in switch’s previous location. Refer to Figure 7.
1
3
2
4
5
TMB1995N
1Plug
2Switch
3Side Screw
4Door Hinge Lug
5Door Assembly
Figure 7
7. Cut wire ties along right side of machine to remove door switch harness from lint panel switch harness bundle. Be careful not to damage harness wires. Refer to Figure 8.
8. Reroute door switch harness up through top panel, along underside of front flange, through screw cable clamp, back down through top panel and into upper left quadrant of cylinder enclosure. Refer to Figure 8.
1
7
2
6
5 | 3 |
4
TMB1996N
1Screw Cable Clamp
2Beginning Location of Door Switch Harness
3Original Switch Location
4Lint Panel Switch Harness
5Wire Ties
6Original Plug Location
7Top Panel
Figure 8
22 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | M414905 |