If standpipe is lower than 36 inches (91.44 cm), you must install No. 562P3 Siphon Break Kit. Refer to Figure 8. This kit is available (as optional equipment at extra cost) through an authorized dealer or parts distributor. Installation instructions are supplied with the kit.

1

3

2

W512I

1562P3 Siphon Break Kit

2Standpipe

3Drain Hose

Figure 8

Wall Installation:

For installations of this type, the drain hose MUST be secured to one of the fill hoses using the beaded strap from accessories bag. Refer to Figure 9.

NOTE: End of drain hose must be below height of cabinet top.

1

2

W329I

1Beaded Strap (tape if necessary)

2Standpipe Adapter

Figure 9

Laundry Tub Installation:

For this type of installation, the drain hose MUST be secured to the stationary tub to prevent hose from disloding during use. Refer to Figure 10. Use the beaded strap (supplied in accessories bag) to secure hose.

We recommend leaving the standpipe adapter on the drain hose for this type of installation.

1

W515I

1Beaded Strap (tape if necessary)

Figure 10

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

201958