Section 2
Installation
This manual is designed as a guide to the installation and maintenance of the
Note: All information, illustrations, and specifications contained in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at
any time without notice.
Machine Overview
The design of these machines emphasizes performance and long service life. The cylinder, shell, and main body panels are fabricated of stainless steel.
These machines feature the
the field.
The AC inverter drive control provides programmable motor speeds, using a single motor. This makes it possible to achieve
The cylinder is supported by two deep groove, sealed, permanently lubricated bearings. The cylinder is constructed with lifters or ribs that lift the laundry from the bath solution when the cylinder rotates at slow speed and then allow it
to tumble back into the bath. This mechanical action accomplishes the cleaning function. The cylinder is perforated, allowing the water to drain from within during the wash and extract steps.
Water enters the machine through electromechanical water valves, which are controlled by the
Electrical controls for the machine are housed in a separate enclosure located underneath the top cover of the machine.
The supply dispenser is located on top of the machine. The supply dispenser compartments are accessed by lifting the rubber cover.
These compartments accept powder or liquid supplies. Each compartment is controlled independently by the
A
F232060 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 9 |