Alliance Laundry Systems UW35B2, UW60B2 manual 25

Programming

Cycle Charts for Domestic OPL Models Built Prior to April 2005 (Displays P-F1)

Displays P-F1 after power is applied to machine when START (enter) keypad is pressed while display shows “- - - -”.

Cycle Steps	Normal	Light	Heavy	Stained	Perm	Visa®	Uniforms	Delicate
	Hot	Soil	Soil	Hot	Press	Warm		Cold
		Hot	Hot		Hot
Cycle reference	CY01	CY02	CY03	CY04	CY05	CY06	CY07	CY08
(display in program mode)
Agitation in effect for cycle	12/3/12	12/3/12	12/3/12	12/3/12	12/3/12	12/3/12	12/3/12	3/12/3
	Normal	Normal	Normal	Normal	Normal	Normal	Normal	Gentle
Wash 1 (WASH indicator)
Time for agitation (min)	2	7	2	4	7	2	2	5
Fill valves (temperature)	Both	Both	Both	Cold	Hot	Both	Both	Cold
Fill water level	High	Low	High	Med	Low	High	High	High
Supply	0	2	0	1	2	0	0	1
Heat (if enabled)	0	0	0	0	0	0	0	0
Drain	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Spin (only if ‘drain’) seconds	0	0	0	0	0	0	0	0
Wash 2 (WASH indicator)
Time for agitation	7	2	7	9	2	7	7
Fill valves (temperature)	Hot	Hot	Hot	Hot	Hot	Both	Hot
Fill water level	Low	High	Low	Low	High	Low	Low
Supply	2	0	1	1	0	1	2
Heat (if enabled)	0	0	0	0	0	0	0
Drain	No	Yes	Yes	Yes	Yes	Yes	Yes
Spin (only if ‘drain’) seconds	0	0	0	0	0	0	0
Wash 3 (WASH indicator)
Time for agitation	2		6	9		7
Fill valves (temperature)	Hot		Hot	Hot		Both
Fill water level	High		Low	Low		Low
Supply	0		2	2		2
Heat (if enabled)	0		0	0		2
Drain	Yes		No	No		No
Spin (only if ‘drain’) seconds	0		0	0		0

Table 4

F232168 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 23