Alliance Laundry Systems Washer-Extractor 10

Introduction

Replacement Parts

If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor.

Customer Service

For technical assistance, call (920) 748-3121, Ripon, Wisconsin U.S.A.

Remove After Shipment (OPL Models Only)

A yellow retainer has been inserted in the door locks of all cabinet hardmount on-premise laundry washer- extractors to prevent the door from locking during shipment. Remove the yellow retainer during installation by pulling it off.

NOTE: Once retainer is removed, machine must be powered to unlock door.

A tag has been attached to the washer-extractor’s door handle as a reminder that the retainer must be removed before operation. Refer to Figure 3.

Remove Yellow Retainer

Before Starting Machine.

Note: A Retainer has been inserted to prevent the door from locking during shipment.

CFS503N

Figure 3

F232135