6Patch Release Note
Patch 86222-06 for Software Release 2.2.2
C613-10319-00 REV F
The entry aging process now works correctly even when there are large
numbers of firewall entries to be aged.
The command SHOW IP DEBUG=n was entered, where n was one greater
than the number of items in the IP debug queue resulted in a fatal error. This
issue has been resolved.
Features in 86222-02
Patch file details for Patch 86222-02 are listed in Table5.
Patch 86222-02 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
When an interface on the firewall was configured with a global IP address
of 0.0.0.0, outgoing packets from the private interface to the public interface
sometimes caused a fatal error. This issue has been resolved.
Re-validation of temporary CA certificates now works correctly.
A fatal error occurred when IGMP received a Join message and attempted
to forward the Join message to other switch ports. This issue has been
resolved.
The SHOW CPU command sometimes displayed incorrect CPU utilisation
figures. Typically a value of about 74% was reported when in fact the CPU
was almost idle. This issue has been resolved.
Port parameters can now be set correctly using the Layer 3 Switch GUI.
Clicking the Apply button on a Layer 3 Switch GUI page caused the switch
to lock up if no configuration file was set, but boot.cfg was present. This
issue has been resolved.
PCR: 01150 Module: FIREWALL Network affecting: No
PCR: 01153 Module: IPG Network affecting: No
Table 5: Patch file details for Patch 86222-06.
Base Software Release File 86s-222.rez
Patch Release Date 26-Jul-2001
Compressed Patch File Name 86222-02.paz
Compressed Patch File Size 202564 bytes
PCR: 01081 Module: FIREWALL Network affecting: No
PCR: 01126 Module: PKI Network affecting: No
PCR: 01128 Module: IPG Network affecting: No
PCR: 01131 Module: CORE Network affecting: No
PCR: 01134 Module: GUI Network affecting: No
PCR: 01135 Module: GUI,INST Network affecting: No