Allied Telesis AR440S manual # ETH configuration, # PPP configuration for PPPoE

branch office 2

Branch office 2 AR440S configuration—the PPPoEoA site with a dynamically assigned IP address

# SYSTEM configuration

set system name=Branch2

# USER configuration

set user securedelay=600

# Define a security officer.

add user=secoff pass=<your secoff password> priv=securityofficer lo=yes telnet=yes

#Change the manager privilege user’s password. set user=manager password=<your-password>

#RADIUS configuration

#If desired, add a RADIUS authentication server for authenticating

#users.

add radius server=<radius-server-address>secret=<secret-key>

# ATM configuration

create atm=0 over=adsl0

add atm=0 channel=1

#ETH configuration

#Create a virtual ethernet interface over ATM. create eth=0 over=atm0.1

#ADSL configuration

enable adsl=0

#PPP configuration for PPPoE

#Create the PPP interface that the router uses to connect to the

#ISP. Use iprequest=on so that the interface obtains its address

#dynamically from the ISP.

create ppp=0 over=eth0-any echo=10 lqr=off bap=off idle=off

set ppp=0 iprequest=on username="branch office 2" password=branch2 pass

# IP configuration

enable ip

add ip int=vlan1 ip=192.168.142.254

#Configure a temporary null address, because the interface gets its

#address through remote assignment.

enable ip remote

add ip int=ppp0 ip=0.0.0.0

add ip rou=0.0.0.0 mask=0.0.0.0 int=ppp0 next=0.0.0.0

Page 48 AlliedWare™ OS How To Note: VPNs for Corporate Networks