Allied Telesis AT -8000S/48 manual Overview, Ideal Branch Office and Wiring Closet Connectivity

Datasheet Switches

AT-8000S/48

Layer 2 Stackable Fast Ethernet Switch

AT-8000S/48

48 port stackable 10/100TX Layer 2 switch with 2 active SFP bays (unpopulated) and 2 standby 10/100/1000T ports (RJ-45)

Overview

One of a series of stackable switches from Allied Telesis, the AT-8000S/48 provides high performance Layer 2 switching in an affordable fixed configuration platform.This switch offers 48 10/100 ports, two fixed 1Gbps SFP slots plus two integrated stacking connectors that deliver a total of 4Gbps stacking bandwidth.The stacking capability integrated into this platform is configured as a resilient ring topology designed to provide high reliability and simplified management for higher port density applications.

Ideal Branch Office and Wiring Closet Connectivity

Powerful line rate performance and stackability make this switch ideal for branch offices or the wiring closet of larger offices. The state-of-the- art QoS capability of this product ensures reliable delivery of advanced network services such as voice while effectively controlling the continually increasing traffic needs found in today’s networks.

Easy Access Networking

Featuring an industry standard CLI and Allied Telesis’ intuitive yet fully featured Web interface the advanced features of the AT-8000S/48 are accessible to a wide range of system administrators. The well known CLI and Web interfaces significantly reduce learning time and minimize the cost of deployment.

Secure Management

Only authorized administrators can access the management interface of the 8000S series. Protocols such as SSL, SSH and SNMPv3 facilitate this protection of your network with local or remote connections.

Securing the Network Edge

To ensure the protection of your data, it is important to control access to your network. Protocols such as IEEE 802.1x port-based authentication guarantee that only known users are connected to the network. Unknown users who physically connect can be isolated to a pre-determined part of your network offering guests such benefits as Internet access while ensuring the integrity of your private network data.

Gigabit and Fast Ethernet SFP Support

All switches in the 8000S family support both Gigabit and Fast Ethernet Small Form-factor Pluggables (SFPs).This makes the 8000S series an ideal family for environments where Gigabit fiber switches will be phased in over time.The 8000S family allows for connectivity to the legacy 100FX hardware until it is upgraded to Gigabit. Support for both speeds of SFPs allows organizations to stay within budget as they migrate to faster technologies.

Key Features

Easy,Well Known Management

•Industry standard CLI

•Simple intuitive, full featured Allied Telesis Web Interface

•Secure encrypted Web and CLI management with SSHv2 and SSL

•SNMP

•Two level access privileges

Affordable Truly Stackable 10/100

Switching Platform

•Single IP address stack management

•4Gig resilient ring stacking architecture

•Across stack link aggregation

•Across stack VLAN configuration

•Across stack port mirroring

•Redundant standby stack master

All the QoS Needed in the Wiring Closet for Today’s Voice and Data Networking

•Eight priorities assigned to four queues

•IEEE 802.1p for Layer 2 QoS

•DSCP (DiffServ) for Layer 3 QoS

•IEEE 802.1p to DSCP remarking traffic ready for transport to the Layer 3 core of the network

•Layer 2 and Layer 3 ACL

Securing the Network at its Most

Vulnerable Point

•IEEE 802.1x and RADIUS network login: for advanced control of user authentication and accountability

•Guest VLAN: to ensure visitors or unauthorized users connect only to services defined by IT e.g. Internet

•TACACS+: for ease of management security administration

•Layer 2 and Layer 3 ACL

•Port MAC address security options

%

+

	Power Supply Efficiency
Allied Telesis	www.alliedtelesis.com