Allied Telesis AT-CV10x Series CV10x SERIES Converteon Series Line Card, Technical Specifications

CV10x SERIES Converteon Series Line Card

Link Test, MissingLink,

and Smart MissingLink Functions

Link Test

The link test is a fast and easy way for you to test the connections between the media converter ports and the end-nodes that are connected to the ports. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and so be able to focus your troubleshooting efforts on the cable or end-node where the problem resides.

MissingLink

The MissingLink feature enables the two ports on the media converter to pass the ‘Link’ status of their connections to each other. When the media converter detects a loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the end-node that the connection has been lost.

Smart MissingLink

The Smart MissingLink feature performs exactly the same function as MissingLink with one additional feature. When a link is lost on a port, the LINK LED of the port which still has a valid connection to its end-node starts to blink. This allows you to quickly determine which port still has a valid connection (LINK LED blinking) and which port has lost its connection (LINK LED off).

Technical Specifications

Status Indicators

System LEDs

DIP Switches

The AT-CV102 line card features both the Diagnostic Mode (Table 1) and Port Configuration (Table 2) DIP switches. The tables below list the positions of the DIP switches.

Table 1. Diagnostic Mode DIP Switches Positions

Operating Mode	DIP 1	DIP 2	DIP 3	DIP 4
Link Test (default)	Off	Off	X	X
Smart MissingLink	Off	On	X	X
(SML)
MissingLink (ML)	On	Off	X	X
Manufacturing	Off	Off	Off	Off
Settings

‘X’ means the DIP switch position could be either On or Off.

Table 2 lists the Port Configuration DIP switches positions.

Table 2. Port Configuration DIP Switches Positions

Operating Mode	DIP 1	DIP 2	DIP 3	DIP 4
Auto MDI-X Enabled	X	Off	X	X
(default)
Auto MDI-X Disabled	X	Off	X	X
Manufacturing	Off	Off	Off	Off
Settings

‘X’ means the DIP switch position could be either On or Off.

Environmental Specifications Maximum operating temperature: 0°C to 40°C

(32°F to 104°F)

Maximum storage temperature: -25°C to 70°C (-13°F to 158°F)

Operating and storage altitude: Up to 3,048 meters (10,000 feet)

Relative		humidity operating		and
storage		(non-condensing):		5% to 95%
Predicted			MTBF (Telcordia SR332):
			AT-CV101	1,020,000	hrs
			AT-CV102	890,000 hrs
			AT-CV102/1	1,020,000	hrs
			AT-CV102/2	1,020,000	hrs
Standards
EMI	part		15:
FCC	class		A, EN55022 class	A, VCCI class A, C-Tick, CE

Immunity:

EN55024

Safety:

UL60950-1 (cULUS), EN60950-1 (TUV)

EN60825

LED	Color	Description
RDY	Green	The line card has passed diagnostics
	Off	The line card has not passed diagnostics
ML	Green	MissingLink	mode	is	enabled
	Off	MissingLink	mode	is	disabled
SML	Green	Smart MissingLink mode is enabled
	Off	Smart MissingLink mode is disabled
Fiber Port LEDs
LED	Color	Description
LK	Green	Link established on the port
	Off	No link established on the port
AT	Green	TX/RX activity detected on the port
	Off	No activity detected on the port
Copper Port LEDs
LED	Color	Description
LK	Green	Link established on the port
	Off	No link established on the port
AT	Green	TX/RX activity detected on the port
	Off	No activity detected on the port
FD	Green	Port operating in full-duplex mode
	Off	Port operating in		half-duplex mode

Physical Specifications
Dimensions		2.2cm x 7.3cm x 13cm
(W x D x H)		(0.855” x 2.89” x 5.1”)
Weight		0.27kg (0.60lbs)
Optical Characteristics
Connector	type	Dual SC or dual ST
Fiber type		Single-mode or multi-mode
Operating	distance	2km (1.24 miles) to 40km (24.8 miles)

Optical Output Power (dBm)
Product	Minimum	Maximum	Wavelength	Connector
AT-CV101	-20dBm to -14dBm		1310nm	Dual ST
AT-CV102	-20dBm to -14dBm		1310nm	Dual SC
AT-CV102/1	-15dBm to	-5dBm	1310nm	Dual SC
AT-CV102/2	-15dBm to	0dBm	1310nm	Dual SC

Receiver Power Sensitivity (dBm)

Product Minimum Maximum

AT-CV101 -31dBm to -11dBm

AT-CV102 -31dBm to -11dBm

AT-CV102/1 -34dBm to -3dBm

AT-CV102/2 -34dBm to -3dBm

Power Characteristics

Power consumption 5.7W

Ordering Information

AT-CV101

Fast Ethernet Converteon media converter line card, 100TX to 100FX, MMF, ST, 2km

AT-CV102

Fast Ethernet Converteon media converter line card, 100TX to 100FX, MMF, SC, 2km

AT-CV102/1

Fast Ethernet Converteon media converter line card, 100TX to 100FX, SMF, SC, 15km

AT-CV102/2

Fast Ethernet Converteon media converter line card, 100TX to 100FX, SMF, SC, 40km

USA Headquarters 19800 North Creek Parkway Suite 200 Bothell WA 98011 USA T: +1 800 424 4284 F: +1 425 481 3895

European Headquarters Via Motta 24 6830 Chiasso Switzerland T: +41 91 69769.00 F: +41 91 69769.11

Asia-Pacific Headquarters 11 Tai Seng Link Singapore 534182 T: +65 6383 3832 F: +65 6383 3830

www.alliedtelesis.com

© 2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000169 Rev E