Electrical Safety, and Emission Statements
This product meets the following standards.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
RFI Emissions FCC Class A, EN55022 Class A, VCCI Class A
Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Immunity | EN 55022 |
Electrical Safety UL 1950 (CULUS), EN 60950 (TUV), EN60825, CSA
U.S. Pat. No. 6,939,058
Copyright © 2005 Allied Telesyn, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. www.alliedtelesyn.com
AT-G8BD-13/-14 Bidirectional GBIC
Transceivers Installation Guide
Overview
The
444
Model | Type of Fiber | TX | RX | |
Optic Cable | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
9 micron SMF | 1310 nm | 1490 nm | ||
|
|
|
| |
9 micron SMF | 1490 nm | 1310 nm | ||
|
|
|
|
Both models feature a single SC connector.
Note
A transceiver must be connected to another transceiver or fiber optic port that has compatible operating characteristics. For instance, the
Laser
Class 1 laser product.
Laser
Do not stare into the laser beam.
Electrical Safety, and Emission Statements
This product meets the following standards.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
RFI Emissions FCC Class A, EN55022 Class A, VCCI Class A
Warning: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Immunity | EN 55022 |
Electrical Safety UL 1950 (CULUS), EN 60950 (TUV), EN60825, CSA
U.S. Pat. No. 6,939,058
Copyright © 2005 Allied Telesyn, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. www.alliedtelesyn.com
Transceivers Installation Guide
Overview
The
444
Model | Type of Fiber | TX | RX | |
Optic Cable | ||||
|
|
| ||
|
|
|
| |
|
|
|
| |
9 micron SMF | 1310 nm | 1490 nm | ||
|
|
|
| |
9 micron SMF | 1490 nm | 1310 nm | ||
|
|
|
|
Both models feature a single SC connector.
Note
A transceiver must be connected to another transceiver or fiber optic port that has compatible operating characteristics. For instance, the
Laser
Class 1 laser product.
Laser
Do not stare into the laser beam.
PN | PN |