Allied Telesis AT-PWR14 warranty Overview, Related Documents, Package Contents, Rev C

CONVERTEON™ Family

AT-PWR14 Redundant Power Supply (AC)

Installation Guide

Allied Telesis, Inc.

www.alliedtelesis.com

Overview

The AT-PWR14, shown in Figure 1, is an AC redundant power supply (RPS) used with the AT-CV5000 chassis only. When installed, the module operates in a standby mode. If the standard power supply fails or loses power, the AT- PWR14 module changes from standby to active and provides all power to the system to prevent a network failure.

	AT-
POWER	PWR14
FAULT

208

Figure 1. AT-PWR14 Power Supply Module

Note

The power supply is hot-swappable. You can install it without powering OFF the AT-CV5000 chassis.

*613-50585-00 Rev C*

Related Documents

This installation guide is an abbreviated version of the installation procedure. For details on the components, features, and functions of this product, refer to the following documents on our web site, www.alliedtelesis.com:

❑AT-CV5000 Media Converter Chassis Installation Guide (PN 613-50580-00)

❑AT-S70 Management Software User’s Guide (PN 613-50617-00)

Package Contents

Make sure the following items are included in the shipping package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

❑One AT-PWR14 Redundant Power Supply (AC)

❑This Installation Guide

❑Warranty Card

Locations of the Power Supply Slots

Figure 2 illustrates the locations of the two power supply modules at the rear of an AT-CV5000 AC model chassis.

A	A	B	B
CVFAN-AT			AT-CVFAN
	AT-PWR14
	100-240VAC~		100-240VAC~
	POWER
	FAULT

214

PS SLOT A - Primary PS SLOT B - Redundant

Figure 2. Locations of the Power Supply Slots on the Rear Panel of

an AT-CV5000 AC Model Chassis

Before installing a power supply, please note the following guidelines:

Note

The AT-CV5000 chassis comes with two slots designated for the power supplies; however, it is shipped with one standard power supply preinstalled and one empty slot for an optional power supply. The redundant power supply can be ordered separately from your ATI sales representative.

Note

Make sure that both power supplies (primary and redundant) are rated for the same power ratings. For information on the power supply module, refer to the documentation that is shipped with the module.

Note

The AT-PWR14 power supply can be installed in either one of the power supply expansion slots while the converter chassis is powered ON. You do not need to power OFF the chassis to install the power supply.

Installing the AT-PWR14 Power Supply

To install the AT-PWR14, perform the following procedure:

1.Unpack the new AT-PWR14 module from its shipping container and store the package material in a safe location.

Note

You must use the original shipping material if you need to return the power supply module to Allied Telesis.

2.Select the power supply slot in the AT-CV5000 chassis where you want to install the AT-PWR14 power supply.

3.Make sure that the power switch is in the OFF position.

4.Loosen the two captive screws that secure the blank slot cover (AT-CV5PNL2) of the selected power supply slot, and remove the blank slot cover, as shown in Figure 3.

A
-CVFAN	A
AT	240VA40VACC~~
	100-0-
	inrWARNINGTehpdiusutcusenbittehfmeoirrgieshksteohrfavveiceleinmcgtoruircnesitthh. oacnko,ndeispcoownneercint paulltp.Toower

211

Figure 3. Removing the Power Supply Slot Cover

5.Remove the AT-PWR14 module from its shipping package.

6.Slide the AT-PWR14 module into the RPS slot, as shown in Figure 4.

A

A 100- 240VAC~ WARNINGThis uni rinepduutcsebthtemfeoirrgieshksteohrfavveiceleinmcgtoruircensithth. oacnko,ndeispcoownneercint paulltp.Toow er

	AT-
POWER	PW	R14
FAULT

209

Figure 4. Inserting the AT-PWR14 Module into the Power Supply Slot

7.Secure the AT-PWR14 module to the AT-CV5000 chassis by using a Phillips screwdriver to tighten the captive screws, as shown in Figure 5.

A
CVFAN-AT	240VAC240VAC~~
	A
	100100--
	inrWARNINGTehpdisuutcusenbtitehfmeorigrieshksteohrfavveiceleinmcgtoruicrensithth. oacnko,ndeispcoownneercint paulltp.Toower

	AT-
POWER	PWR1	4
FAULT

212

Figure 5. Securing the AT-PWR14 Module

613-50585-00 Rev C 1 2 3