Alloy Computer Products RNS5, RNS8 user manual Ports, FDX/COL of Port 7/8

	Blinks	The port is transmitting or receiving
		packets from the TX device.
	Off	No device is attached.
	Orange	The port is operating in full-duplex
		mode.
FDX/COL of Port 7/8
	Blinks	Collision of packets occurs.
	Off	The port is in half-duplex mode or
		no device is attached.
Port LED	Status	Description
	Orange	The port is operating in full-duplex
		mode.
	Blinking	Collision of Packets occurring.
	orange
Port Status (Port 1	Off	The port is in half-duplex mode or
to Port 6)		no device is attached.
	Green	A network device is detected.
	Blinking	The port is transmitting or receiving
	green	packets from the TX device.
	Off	No device is attached.

Table 2

Ports

RJ-45 ports (Auto MDI/MDIX): RNS5 has five 10/100 Mbps auto-sensing ports for 10Base-T or 100Base-TX device connection. The UTP ports will auto-detect 10Base-T and 100Base-TX connections. Auto MDI/MDIX allows users to connect another switch or workstation without changing straight through or crossover cabling. See Figure C and C-1 for the schematic diagram of straight through and crossover cabling.

8