Allstar Products Group 110927 installation instructions Model

by

MVP Quik-Code

Wireless Keyless Entry

Installation Instructions

Model 110927

1	ABC	DEF
	2	3
GHI	JKL	MNO
4	5	6
PRS	TUV	WXY
7	8	9
*	0	#

ON

RESET

Proper installation of your radio controls will assure years of

trouble-free operation

READ THE FOLLOWING INSTRUCTIONS THOROUGHLY

BEFORE STARTING INSTALLATION

Your MVP Quik-Code Wireless Keyless Entry is designed to remotely operate MVP garage door openers. The system permits the user to select one of 10,000 personal identification numbers (PIN’s) and operate multiple doors by using different PIN’s. The radio frequency of the remote controls is fixed and tuned at the factory; adjustments are not required and should not be attempted by the end user.

WARNING

Features of the Quik-Code Wireless Keyless Entry

On/Reset Key: This key turns on the keypad and light system allowing you to operated the system as well as to see the keys in the dark. The keypad will remain lit for 20 seconds after the last key is pressed.

Single Button Mode: Once you have entered a valid PIN and your door operator begins to function, the number keys remain active for 20 seconds. Pressing any one of these keys sends another signal to the operator and allows you to stop and start the door operator.

Low Battery Indicator: The lighting for your keypad also serves as a low battery indicator. When the keypad lights flash on and off the battery should be replaced with a standard 9 volt battery.

Non-Volatile Memory: It is not necessary to reprogram the keypad after you replace your battery.

Allstar MVP Quik-CodeTransmitters and Receivers are

compatible with HomeLink®.

HomeLink® is a registered trade mark of Johnson Controls.