W |
|
A |
|
R |
|
N |
|
I | Investigate the layout of your vehicle thoroughly before drilling or cutting. |
NTake care when you work near the gas tank, gas lines, hydraulic lines, electri-
G cal components and electrical wiring. Do not use the equipment unmounted.
/ | Attach this system securely to prevent damage, particularly in the event of an | |
D | accident or aggressive driving. Do not mount the system so that wire con- | |
nections are unprotected or are subjected to pinching or damage from nearby | ||
I | ||
objects. Before connecting or disconnecting power connections at the system | ||
S | ||
power terminals, disconnect the +12V DC wire at the battery end. Confirm that | ||
C | ||
your source unit and other equipment are turned off while connecting the input | ||
L | ||
terminals. If you need to replace the power fuse, replace it only with a fuse | ||
A | ||
identical to the provided fuse. Using a fuse of different type or rating may result | ||
I | ||
in damage to the system, which is not covered by the manufacturer’s warranty. | ||
M | ||
Do not install any product where it may be subjected to excessive heat, moisture | ||
E | ||
and dust or where it may be repeatedly kicked, brushed or bumped. Make abso- | ||
R | ||
lutely sure that the terminals for the products are connected to the proper inputs | ||
| ||
| and outputs from the music source. Never run the wiring on the outside of the | |
| vehicle or under it where it can be damaged by road hazards or any moving | |
| parts of the vehicle. Use existing wire channels, sills, panels and molding strips | |
| inside the vehicle to hide the wiring for safety and a neat appearance. |
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of the vehi- cle’s safety or structural support system. If you are unsure, it is best to have the product professionally installed by an Authorized Alphasonik Dealer. Never sacrifice your safety for sound.
19
