W | Investigate the layout of your vehicle thoroughly before |
Adrilling or cutting. Take care when you work near the gas tank,
R gas lines, hydraulic lines, electrical components and electrical
NI wiring. Do not use the equipment unmounted. Attach this sys
N tem securely to prevent damage, particularly in the event of an
G accident or aggressive driving. Do not mount the system so that wire connections are unprotected or are subjected to pinching
Aor damage from nearby objects. Before connecting or discon-
N necting power connections at the system power terminals, dis-
D connect the +12V DC wire at the battery end. Confirm that your-
Dsource unit and other equipment are turned off while connecting
I the input terminals. If you need to replace the power fuse, re-
S place it only with a fuse identical to the provided fuse. Using a
C fuse of different type or rating may result in damage to the sys-
L tem, which is not covered by the manufacturer’s warranty. Do
A not install any product where it may be subjected to excessive
I heat, moisture and dust or where it may be repeatedly kicked,
M brushed or bumped. Make absolutely sure that the terminals
E for the products are connected to the proper inputs and outputs
R from the music source. Never run the wiring on the outside of
the vehicle or under it where it can be damaged by road hazards or any moving parts of the vehicle. Use existing wire channels, sills, panels and molding strips inside the vehicle to hide the wir- ing for safety and a neat appearance.
DISCLAIMER
IMPORTANT: Never cut any metal that is an integral part of the vehicle’s safety or structural support system. If you are unsure, it is best to have the product professionally installed by an Authorized Alphasonik Dealer. Never sacrifice your safety for sound.
15
