Alpine CDA-9883E owner manual Controlling CD Changer Optional, 21-EN

Models: CDA-9883E

1 33
Download 33 pages 2.17 Kb
Page 22
Image 22

Repeat Play

Only Repeat One is available for the iPod.

Repeat One:

A single song is repeatedly played back.

1 Press 4.

The song is played back repeatedly.

RPT

(off)

RPT

(Repeat One)

 

 

2 To cancel repeat play, select (off) with the above procedure.

During repeat playback, no other songs are selectable by pressing

or .

Displaying the Text

You can display the tag information of a song in the iPod.

Press TITLE.

Each press changes the display.

If you want to change the display when the TEXT SCROLL is set to SCROLL MANU, press TITLE while the text is scrolling. If the scroll has been completed, press TITLE to scroll the text again.

TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME* ALBUM NAME*

SONG TITLE* TRACK NO./ELAPSED TIME

*TAG information

“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag information.

Only alphanumeric characters (ASCII) can be displayed.

If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the adapter. Therefore, a maximum of 250 characters is recommended. The maximum number of characters for the head unit is 128 (128 byte).

Some characters may not be correctly displayed.

“NO SUPPORT” is displayed if text information is not supported by the unit.

Changer (Optional)

/ /ENT SOURCE/ BAND

FUNC./SETUP Select buttons (1 through 6)

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit.

Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by this unit.

See “Multi-Changer Selection (Optional)” on page 22 for selecting the CD Changers.

The controls on this unit for CD Changer operation are operative only when a CD Changer is connected.

The DVD changer (optional) is controllable from this unit as well as the CD changer.

1 Press SOURCE/ to activate the CHANGER mode.

The source indicator varies depending on the connected source.

Press BAND to switch the Disc mode in the Changer mode.

2 Press FUNC./SETUP to activate Disc Select mode.

Disc Select Mode

Disc Select Mode *

(Disc No.1~6)

(Disc No.7~12)

Disc Select Mode

RPT/M.I.X. Mode

(Disc No.1~6)

3 Press the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer.

The selected disc number appears in the display and CD/MP3 playback starts.

After selecting the desired disc, you can operate in the same way as for the CD player of this unit. For details, please see the CD/MP3/ WMA/AAC section.

*When a 12-disc CD changer is connected.

21-EN

Page 22
Image 22
Alpine CDA-9883E owner manual Controlling CD Changer Optional, 21-EN