Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDA-9885. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9885 to the fuse box, make sure the fuse for the intended circuit of the CDA-9885 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDA-9885 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

SERIAL NUMBER:

 

 

 

 

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

 

 

 

below and keep it as a permanent record. The serial number or the

INSTALLATION TECHNICIAN:

 

 

engraved serial number is located on the bottom of the unit.

PLACE OF PURCHASE:

 

 

 

 

 

 

 

 

 

 

34-EN

Page 35 Page 37
Page 36
Image 36
Alpine CDA-9885 owner manual Installation and Connections, 34-EN
Page 35 Page 37

CDA-9885 specifications

The Alpine CDA-9885 is a high-performance car audio receiver that combines advanced technology with user-friendly features, making it a sought-after choice for audiophiles and casual listeners alike. As a product of Alpine, a renowned name in automotive audio systems, the CDA-9885 boasts a host of features that enhance both sound quality and usability.

One of the standout features of the CDA-9885 is its customizable user interface. The unit offers a vivid, easy-to-read display that can be adjusted to suit personal preferences. Users can change the color of the display and buttons to match their vehicle's interior, ensuring a seamless blend of style and functionality. This personalization extends to 3D album art display, allowing users to visually engage with their music collection.

The CDA-9885 supports a wide array of audio sources, including CD, MP3, WMA, and AAC formats. The built-in CD player ensures that users can enjoy traditional media, while the USB port and auxiliary input permit direct connection of digital devices such as smartphones and flash drives. Additionally, the receiver is compatible with iPod and iPhone, facilitating easy control and playback of music through these devices.

Sound quality is a primary focus of the CDA-9885, featuring a 24-bit digital-to-analog converter (DAC) that delivers superior audio fidelity. The unit also incorporates Alpine's Bass Engine technology, which allows users to tailor their sound experience with adjustable bass boost and subwoofer level control. Furthermore, the five-band parametric equalizer enables precise audio adjustments, catering to different music genres and personal tastes.

The CDA-9885 includes Bluetooth connectivity, enabling hands-free calling and audio streaming directly from compatible devices. This feature not only enhances convenience but also ensures safety while driving, as users can maintain focus on the road. An optional Bluetooth adapter can expand functionalities, including support for voice command features.

Another important characteristic of the CDA-9885 is its expandability. With three sets of preamp outputs, users can easily connect external amplifiers and subwoofers to create a more powerful audio system. The receiver is also compatible with Alpine's proprietary products, such as GPS navigation units and amplifiers, allowing for a complete audio solution tailored to individual preferences.

In summary, the Alpine CDA-9885 stands out in the realm of car audio receivers due to its exceptional features, advanced sound technologies, and user-friendly interface. Whether you're an audiophile looking for precise sound control or a casual listener wanting to enjoy music on the go, the CDA-9885 offers a versatile and high-quality listening experience that enhances any drive.
Top Page Image Contents