Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 to 4 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDE-9846/CDE-9842. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-9846/CDE-9842 to the fuse box, make sure the fuse for the intended circuit of the CDE-9846/CDE-9842 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDE-9846/CDE-9842 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

20-EN

Page 20 Page 22
Page 21
Image 21
Alpine CDE-9842 owner manual Installation and Connections
Page 20 Page 22

CDE-9842 specifications

The Alpine CDE-9842 is a dynamic mix of cutting-edge technology and user-friendly features, designed to elevate the driving experience through superior audio quality and versatility. This car stereo unit is particularly revered for its robust sound performance, making it a popular choice among car audio enthusiasts.

One of the standout features of the CDE-9842 is its high-quality sound reproduction. The unit comes equipped with a powerful built-in amplifier that enhances audio clarity and delivers crisp, dynamic sound. The 24-bit DAC (Digital-to-Analog Converter) ensures that the audio signal is processed efficiently, resulting in an accurate reproduction of your favorite music.

The CDE-9842 supports various playback formats, including MP3, WMA, and AAC, allowing you to enjoy your music library from multiple sources. In addition to traditional CDs, the unit features a USB port for connecting flash drives, enabling direct playback of digital audio files. This flexibility makes it easy to listen to an extensive array of music without the hassle of carrying physical discs.

Connectivity is another strong suit of the CDE-9842. It includes Bluetooth technology, which offers seamless wireless audio streaming from smartphones and other devices. This feature not only allows for hands-free calling but also makes it easy to access your favorite playlists while keeping your focus on the road.

Another key component of the CDE-9842 is its customizable user interface. The unit features an intuitive control layout with a vibrant display that can be adjusted for brightness, enhancing visibility in various lighting conditions. Users can personalize their sound experience with adjustable equalizer settings, allowing them to fine-tune the audio output according to their preferences.

Furthermore, the CDE-9842 is equipped with a built-in AM/FM tuner, providing access to a wide range of radio stations. It also includes the capability for satellite radio compatibility, expanding your listening options even further.

In terms of installation, the Alpine CDE-9842 is designed for easy integration into a variety of vehicle models. Its standard 1-DIN form factor makes it a versatile choice for those looking to upgrade their car's audio system.

Overall, the Alpine CDE-9842 combines impressive sound quality, modern connectivity options, and user-friendly features, making it a standout choice for anyone seeking to enhance their in-car audio experience. Whether you're a casual listener or an avid audiophile, this head unit promises a satisfying sound journey on the road.
Top Page Image Contents