Alpine CDE-9874, CDE-9872 7-EN, Setting Time, Listening to Radio, Lowering Volume Quickly, 4 Press, CDE-9874, CDE-9872, mode, and then press //ENT, 1 Press SOURCE/to select TUNER mode

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume level by 20 dB.

Press /MUTE (CDE-9874 only) or MUTE/SETUP (CDE-9872 only) to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing /MUTE (CDE-9874 only) or MUTE/SETUP (CDE-9872 only) again will bring the audio back to its previous level.

Setting Time

1 Press and hold SOUND/SETUP (CDE-9874 only) or MUTE/SETUP (CDE-9872 only) for at least

2 seconds to activate the SETUP mode.

2 Turn the Rotary encoder (CDE-9874 only) or press and (CDE-9872 only) to select the CLOCK ADJ

mode, and then press / /ENT.

The time indication will blink.

3 Turn the Rotary encoder (CDE-9874 only) or press

and (CDE-9872 only) to adjust the hours while the time indication is blinking.

4 When the hour has been adjusted, press / /ENT.

5 Turn the Rotary encoder (CDE-9874 only) or press

and (CDE-9872 only) to adjust the minutes while the time indication is blinking.

6 Press and hold SOUND/SETUP (CDE-9874 only) or MUTE/SETUP (CDE-9872 only) for at least 2 seconds to return to normal mode.

•To synchronize the clock to another clock/watch or radio time

announcement, press and hold / /ENT for at least 2 seconds after setting the “hour.” Minutes will reset to “00”. If the display shows over “30” minutes when you do this, the time will advance one hour.

•Pressing /MUTE (CDE-9874 only) or /AUDIO (CDE-9872 only) will return to the previous mode.

•If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Radio

CDE-9874

SOURCE/

TUNE/A.ME BAND

Preset buttons (1 through 6)

CDE-9872

SOURCE/

TUNE/A.ME BAND

Preset buttons (1 through 6)

Listening to Radio

1 Press SOURCE/ to select TUNER mode.

2 Press BAND repeatedly until the desired radio band is displayed.

F1 (FM1)F2 (FM2)AMF1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode)SEEK (Local mode) OFF (Manual mode)DX SEEK

•The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

4 Press	or		to tune in the desired station.
Holding down		or	will change the frequency
continuously.