17-EN
Monitor Setup
Adjusting Picture
Visual EQ, Brightness, color, tint, contrast and sharpness are
adjustable.
• Each source is independently adjustable.
• Make adjustments within 6 seconds, otherwise the OSD (On Screen
Display) will turn off automatically.
• After adjusting, the “OFF” setting in Visual EQ changes to
“CUSTOM”. After resetting the unit, “CUSTOM” changes back to
“OFF”
1 Press SETUP button on the remote control.
Or press and hold the SELECT button on the Front Control Keys for at least 2 seconds to open SETUP screen. The PICTURE setting menu is highlighted.
SELECT
Front Control Keys
Remote Control
VISUAL EQ Operation
You can select a mode suitable for the subject image.
2 To change VISUAL EQ, press or to cycle
through the OSD as OFF, NIGHT MOVIE, SOFT,
SHARP and HIGH CONT. (Default: OFF)
VISUAL EQ mode (manufacturer’s settings) selection (VISUAL EQ MODE)OFF: Normal Setting (Visual EQ OFF)NIGHT MOVIE: Suitable for movies in which dark scenes frequently appear.SOFT: Suitable for CGs and animated films.SHARP: Suitable for old movies where images are not clearly shown.HIGH CONT.: Suitable for recent movies.
• “OFF” will change to “CUSTOM”, when any of the picture
mode (Brightness, Color, Tint, Contrast and Sharpness) has been
adjusted
• NIGHT MOVIE, SOFT, SHARP and HIGH CONT. are fi xed values.
They cannot be set manually. If the picture mode is changed, they
automatically change to CUSTOM mode.
• To return OFF mode, press RESET on the picture mode, or change
values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS
to 0 manually.
3 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Brightness
2 Press ▲ or ▼ and select BRIGHT.
3 Press or to adjust the brightness. Brightness
can be adjusted from –15 (MIN) to +15 (MAX).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Color Density
2 Press ▲ or ▼and select COLOR.
3 Press or to adjust the color density. Change
depth can be adjusted from –15 (MIN) to +15 (MAX).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
SETUP