Alpine PXI-H990 manual Side Panel

< Side Panel >

Terminal specification		Connect to:
•	DVD Audio Link terminal	Connect to the DVD Audio
	Terminal for DVD audio playback.	terminal of the DVI-9990 head
		unit, etc., using the DVD Audio
		Link cable.
•	Microphone terminal	Connect to the microphone
	Connect microphone.	(supplied with the main unit) or
	Connect to the microphone terminal with the supplied microphone	the separately sold monitor
	terminal connection cable when using the separately sold monitor	(TMI-M990) Road EQ
	(TMI-M990) internal Road EQ microphone.	microphone terminal.
•	USB terminal	Connect to a computer's USB
	Used to make settings and adjustments with a	terminal with a USB cable (mini
	computer. USB cable (mini B type) and computer	B type).
	software are required. For details, contact your
	store of purchase or an Alpine Information Center.
•	Ground terminal	Connect to the vehicle’s body
	Connect securely to a metal part of the vehicle’s
		using the ground cable.
	body using the ground cable.
•	Remote OUT terminal	Connect to amplifier.
	Connect to the amplifier or other peripheral device.
•	Battery power terminal	Connect to a cable to which
	Power is supplied constantly to the PXI-H990	power is constantly supplied.
	regardless of whether the engine key is on or off.
•	IONBUS terminal	Connect to the IONBUS
	Use when connecting with an IONBUS	terminal using the IONBUS
	compatible terminal or upgrading the system.	cable.
•	Audio input terminal (RCA input)	Connect to any product with an
	Accepts an audio signal output from videos etc.	audio output terminal using
	Connect using an RCA cable.
		RCA-type connectors.
•	Audio output terminal (RCA output)	Connect to amplifier.
	Outputs an audio signal.

•Remove the DVD Audio link, IONBUS or USB terminal covers when connecting

Memo	the DVD Audio Link cable, the IONBUS cable or the USB cable.
	Leave the covers on when not using the DVD Audio link, IONBUS or USB terminal.

*Depending upon the system configuration, the outputs will drive different types of speaker drivers.

		When one PXI-H990 is connected			When two PXI-H990s are connected
		SYSTEM1	SYSTEM2	SYSTEM3	SYSTEM4 (Front)	SYSTEM4 (Rear)
CH-1		Front L TW	Front L TW	*1	Front L TW	Rear L TW
				Front L
CH-2		Front R TW	Front R TW	Front R*1	Front R TW	Rear R TW
CH-3		Front L WF*1	Front L MID*2	Front C	Front L MID*2	Rear L WF
CH-4		Front R WF*1	Front R MID*2	Sub WF 1	Front R MID*2	Rear R WF
CH-5		Rear L	Front L WF*2	Rear L	Front L WF*2	Rear C TW
CH-6		Rear R	Front R WF*2	Rear R	Front R WF*2	Rear C WF
CH-7		Front C	Sub WF 1	Rear C	Front C TW	Sub WF 1
CH-8		Sub WF	Sub WF 2	Sub WF 2	Front C WF	Sub WF 2
*1	There is no OFF setting.

*2 It is not possible to turn both “MID” and “WF” off.

If one is set to “OFF”, the other cannot be set to “OFF”.

•It is necessary to change the setting corresponding with the speaker (system).

Memo	(See “Setting the speakers” on the Owner’s Manual)
	• Do not connect the tweeter (TW) to the channel without “TW” indicated in the table
	above. If connected, the speaker may be damaged.
	• For SYSTEM 1, REAR TW cannot be connected.
	• For SYSTEM 3, FRONT TW and REAR TW cannot be connected.

11-EN