Smart Digital Adapter
4
Step 4
Take the end of the cable with the right angle connector and plug it into the back of the Alpine head unit as shown in Fig 3. The other end of the cable coming from the white rectangle connector is a pass through cable that can be used to connect other Alpine products to your Alpine head unit, i.e. CD changer.
Fig 3
Note: The location of the connections on the Alpine head unit may vary depending on the Alpine model.
Step 5
Start your car and turn on your Alpine head unit to confirm that the XM Direct system is properly connected. When you tune to XM channel 1, you should see “XM Preview” on your Alpine head unit LCD, and hear that channel through your car speakers.
If not, check to make sure all connections are correct or refer to the trouble shooting section of this installation guide.
Step 6
Mount and secure the XMDALP100 in a suitable location that will not interfere with the radio and will not vibrate or rattle after installation.
