Alps Electric Virtual Cable Light Module manual Purpose, Description

CONFIDENTIAL Rev 1.0

1. Purpose

This document is intended as a quick guide for the user to get up and running quickly with the ALPS Virtual Cable Light modules, software and the hardware boards on which the modules are mounted. The various switches and their modes of operation will also be explained.

2. Description

The actual board used for the Virtual Cable Light module can be seen below.

It comprises of 2 boards connected to each other through a 10-pin connector. The board on the right-hand side of the figure is where the module is mounted. On the left-hand side of the above figure the line-driver board can be seen. This Board is used to convert between TTL levels and RS232 levels. The boards can be powered through a single 5V supply, which is connected to the board on which the module is mounted. The line driver board is powered from that board. In the following sections the function of each the 4 switches will be explained.

Copyright  2003 ALPS Electric Co. LTD.

“BLUETOOTHTM is a trademark owned by the Bluetooth SIG Inc, and licensed to ALPS ELECTRIC Co. LTD”