Altinex DA1804NT manual Precautions / Safety Warnings, General, Handling, Cleaning, Fcc Notice

Models: DA1804NT

1 8
Download 8 pages 32.56 Kb
Page 3
Image 3
PRECAUTIONS / SAFETY WARNINGS

DISTRIBUTION AMPLIFIERS

PRECAUTIONS / SAFETY WARNINGS

1

Please read this manual carefully before using your DA1804NT and keep it handy for future reference. These safety instructions are to ensure the long life of your DA1804NT and to prevent fire and shock hazards. Please read them carefully and heed all warnings.

1.1 GENERAL

Qualified ALTINEX service personnel or its authorized representatives must perform all service.

Connect the unit to a properly rated supply circuit.

1.2 HANDLING

Handle the DA1804NT carefully. Dropping or jarring can damage internal components.

For best results, place the DA1804NT on a flat, level surface in a dry area away from dust and moisture.

To prevent fire or shock, do not expose this unit to water or moisture. Do not place the DA1804NT in direct sunlight, near heaters, or heat-radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

Do not pull the cables that are attached to the DA1804NT.

To turn off the main power, be sure to remove the cable from the power outlet. The power outlet socket should be installed as near to the equipment as possible and should be easily accessible.

1.4 CLEANING

Clean only the connector area with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. Do not clean or touch any component or PCB.

1.5 FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

400-0004-004

2

Page 3
Image 3
Altinex DA1804NT manual Precautions / Safety Warnings, General, Handling, Cleaning, Fcc Notice, Distribution Amplifiers