Precautions / Safety Warnings

DISTRIBUTION AMPLIFIERS

Please read this manual carefully before using your DA1904SX Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1904SX and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

∙Unauthorized personnel shall not open the unit since there are high-voltage components inside.

∙Qualified Altinex service personnel, or their authorized representatives must perform all service.

1.2SAFETY GUIDELINES FOR THE RACK- MOUNTING OF THE DA1904SX

∙Maximum operating ambient temperature is 35 (degrees C).

∙Never restrict the air flow through the devices’ fan or vents.

∙When installing equipment into a rack, distribute the units evenly. Otherwise, hazardous conditions may be created by an uneven weight distribution.

∙Connect the unit to a properly rated supply circuit.

∙Reliable Earthing (Grounding) of Rack- Mounted Equipment should be maintained.

1.3 INSTALLATION

∙For best results, place the DA1904SX Distribution Amplifier on a flat, level surface in a dry area away from dust and moisture.

∙To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1904SX Distribution Amplifier in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

∙Handle the DA1904SX Distribution Amplifier carefully because dropping or jarring can damage internal components.

∙Do not place heavy objects on top of the DA1904SX. If the DA1904SX is to be mounted to a table or wall, use only Altinex made mounting accessories, such as mount mini-brackets DA1295SX and cables for optimum setup.

∙To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as close to the equipment as possible, and should be easily accessible.

∙Do not pull the power cord or any cable that is attached to the DA1904SX Distribution Amplifier.

∙If the DA1904SX Distribution Amplifier is not used for an extended period, disconnect the power cord from the power outlet.

1.4 CLEANING

∙Unplug the DA1904SX power cord before cleaning. Clean surfaces with a dry cloth. Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC / CE NOTICE

∙This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

DA1904SX specifications

The Altinex DA1904SX is a versatile signal distribution amplifier renowned for its robust design and advanced features, catering to the high demands of modern A/V installations. Ideal for various settings, including conference rooms, auditoriums, and public display environments, the DA1904SX provides exceptional performance and reliability.

One of the standout features of the DA1904SX is its ability to handle a variety of input signals. It supports HDMI, DVI, and DisplayPort formats, making it suitable for diverse multimedia sources. This adaptability is crucial in today's multimedia landscape where various audio and video signals need to be seamlessly integrated. The DA1904SX can accept resolutions up to 4K at 60Hz, ensuring crystal-clear image quality for high-resolution applications.

The DA1904SX utilizes advanced signal processing technologies to ensure that the integrity of the audio and video signals is maintained throughout the distribution. With advanced equalization and signal regeneration capabilities, it compensates for signal degradation that can occur over long cable runs. This is particularly beneficial in scenarios where long-distance cabling is necessary, allowing users to experience high-quality audio and video without loss of fidelity.

Another notable aspect of the DA1904SX is its user-friendly design. It features a compact form factor that facilitates easy installation in various environments, while also providing a straightforward interface for configuration and use. Additionally, it supports both rack-mountable and standalone setups, giving users flexibility in integrating the unit into existing A/V systems.

The DA1904SX also incorporates features such as EDID management and HDCP compliance, ensuring compatibility across a wide range of devices. The EDID management function simplifies the connection process by allowing the DA1904SX to communicate with multiple source devices, ensuring that the optimal settings are automatically established.

In terms of reliability, the Altinex DA1904SX is built with high-quality components designed for durability and long lifespan. It is equipped with power supply options that enhance its stability, making it a dependable choice for critical installations where performance is paramount.

In summary, the Altinex DA1904SX stands out as a leading choice for professionals seeking an efficient and reliable signal distribution solution. With its comprehensive support for various formats, high-resolution handling, advanced signal processing capabilities, and user-centric design, it is a powerful tool for modern A/V systems, ensuring high-quality audio and video delivery across multiple displays. The DA1904SX exemplifies Altinex’s commitment to innovative and effective A/V solutions, making it an essential component in any sophisticated A/V setup.

Altinex DA1904SX manual Precautions / Safety Warnings

Models: DA1904SX