Altinex PNP527C, PNP547 ABOUT YOUR PNP515/517, Technical Specifications, Tabletop Solutions

TABLETOP SOLUTIONS

ABOUT YOUR PNP515/517 2

PNP515/517

Pop ‘N Plug with Custom Tabletop Surface

∙Customizable to almost any table top

∙Several standard international configurations

∙Smooth new look on all sides

∙Cutout always matches table surface

∙Simple, slide-in installation

∙Opens/closes by pressing on top

∙Gas spring lift mechanism

This Pop ‘N Plug uses a custom tabletop cutout surface, and hardware is attached underneath the cutout. When closed, the PNP515/517 lays flat and matches the grain on your table.

The PNP515/517 design allows the connector panels to be easily installed. Just remove the top and slide the connector panels into place. In the open position, the PNP515/517 is functional yet maintains a smooth, clean appearance. A simple press on the lid closes the unit flush with the tabletop.

The PNP515 can be purchased with preconfigured options available that include two standard sectional plates.* Each plate includes one or more of the following: AC power, computer video, stereo audio, modem, or network connections. The AC power receptacles on the face plates are available with US or international connections.

All connectors on the face plates are female receptacles. Each signal connector is connected via a 6-foot cable to its corresponding male plug at the opposite end. The AC power cables are 9-foot cords terminated with standard NEMA plugs for the US version, or with the applicable plug for international versions.

*See DIAGRAM 6 and DIAGRAM 7 for the available standard plates on both US and international units.

TECHNICAL SPECIFICATIONS 3

Specifications are subject to change.

See www.altinex.com for up-to-date information.

FEATURES/			PNP515/517
DESCRIPTION
Inputs (female) /			PNP517
Outputs (male)
AC Power		NEMA 5-15 (8)
Video		15-pin HD (4)
Computer Audio		3.5mm (4)
Network		RJ-45 (4)
Modem		RJ-11 (4)
C-Video		RCA (2)
Compatibility			PNP515
Accepts DS901		DS901-122 for UK,
		DS901-123 for Australia,
STANDARD		DS901-124 for Germany,
sectional plates. *		DS901-128 blank,
		DS901-130 for US
Accepts DS901		DS901-125 for UK,
		DS901-126 for Australia,
CONFIGURABLE
		DS901-127 for Germany,
sectional plates. *
		DS901-131 for US
Table 1. PNP515 General
MECHANICAL			PNP515/517
Min. Table Thickness			0.750 in (19 mm)
Max. Table Thickness			1.125 in (29 mm)
Max. weight of custom top			22 oz (0.624 kg)
Width			5.65 in (144 mm)
Depth			5.45 in (138 mm)
Height, opened			5.10 in (130 mm)
Height	(below tabletop)		8.75 in (222 mm)
Width	(below tabletop)		8.50 in (216 mm)
Depth	(below tabletop)		6.125 in (156 mm)
Finish			Matte Black
T° Operating			10°C-35°C
T° Maximum			40°C
Humidity			90% non-condensing

Table 2. PNP515/517 Mechanical

400-0464-003 3