Altinex manual INSTALLING YOUR VM2218PS, Operation, Troubleshooting Guide, Place the VM2218PS

V-MATRIX

INSTALLING YOUR VM2218PS	5
Step 1. Place the VM2218PS	inside the
enclosure.

Step 2. Attach the VM2218PS to the enclosure using the provided screws to secure it into place.

Step 3. Connect either of the power entry connectors of the VM2218PS to the power outlet with the provided power cord. The power supply will work with voltages between 90V-265V.

Step 4. To remove the VM2218PS from the enclosure unfasten the screws attached the power supply.

5

OPERATION 6

The VM2218PS Power Supply will operate successfully as long as the unit is installed properly and other technical specifications are followed.

TROUBLESHOOTING GUIDE 7

We have carefully tested and have found no problems in the supplied VM2218PS; however, we would like to offer suggestions for the following:

•First, make sure that power is connected to the power-input connectors and input power is within the range of 90-265 VAC.

•Make sure that the VM2218PS is properly attached to the enclosure.

•If there is problem with the unit please call ALTINEX at (714) 990-2300.

5