Angle
Adjustment
Knobs
Brass
Thumbscrew
Brass
Thumbscrew
Angle
Adjustment
Knobs
Figure 3
Height Adjustment Ring
3Lay main easel frame flat on floor with brass height adjustment track facing up.
4Carefully slide canvas support assembly from below into slots and tracks in main frame, as shown in Figure 3. Pull
5Loosen the two angle adjustment knobs and slowly lift frame into the vertical position, as shown in Figure 4. Tighten knobs when desired angle is reached.
6Slide top bracket down over main vertical track and secure with brass thumbscrew at desired height, as shown in Figure 4.
7Your easel is now ready to use. Enjoy!
Figure 4
To Adjust Height
1Loosen brass thumbscrew on back of main vertical track.
2Pull
3Retighten brass thumbscrew.
Please save these instructions for future reference.
©2008 | ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT | www.alvinco.com |
Phone: |