30" (76 cm) Freestanding Electric Range
PRODUCT MODEL NUMBERS
AER5522VA AER5844VA
AER5822VA AER6011VA
Electrical: Range must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located behind the control panel or on the oven frame behind the storage drawer panel. Refer to the figures in the “Product Dimensions” section.
PRODUCT DIMENSIONS
A
This range is manufactured with the neutral terminal connected to the cabinet. Use a
F
B
C
Range Rating* |
| Specified Rating of |
|
| Power Supply Cord Kit |
|
| and Circuit Protection |
120/240 Volts | 120/208 Volts | Amps |
8.8 - 16.5 KW | 7.8 - 12.5 KW | 40 or 50** |
16.6 - 22.5 KW | 12.6 - 18.5 KW | 50 |
*The NEC calculated load is less than the total connected load listed on the model/serial rating plate.
**If connecting to a
A circuit breaker is recommended.
The range can be connected directly to the circuit breaker box (or fused disconnect) through flexible or nonmetallic sheathed, copper or aluminum cable.
Do not use an extension cord.
E
D
A. 27¹⁷⁄₃₂" (69.9 cm) max. depth with handle
B. 46⁷⁄₈" (119.1 cm) overall height (max.) with leveling legs screwed all the way in*
C. 36" (91.4 cm) cooktop height (max.) with leveling legs screwed all the way in*
D. 29⁷⁄₈" (75.9 cm) width E. 25" (63.5 cm) depth
F. Model/serial rating plate (located on the left side frame behind storage drawer panel)
*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.
CABINET OPENING DIMENSIONS
Cabinet opening dimensions shown are for:
25" (63.5 cm) countertop depth 24" (61.0 cm) base cabinet depth 36" (91.4 cm) countertop height
A
B
D
E
F
C
A. 13" (33.0 cm) max. upper cabinet depth B. 30" (76.2 cm) min. opening width
C. For minimum clearance to top of cooktop, see NOTE*. D. 30¹⁄₈" (76.5 cm) min. opening width
E. Outlet - 8" (20.3 cm) to 22" (55.9 cm) from either cabinet, 5¹⁄₂" (14.0 cm) max. from floor
F. ⁷⁄₈" (2.2 cm) min. required between cutout and cabinet door or hinge.
*NOTE: 24" (61 cm) min. when bottom of wood
or metal cabinet is protected by not less than 1/4" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation | Ref. W10196158 |
Instructions packed with product. Specifications subject to change without notice. |
