Door Alignment

A refrigerator that is not level from side-to-side may appear to have doors that are not properly aligned. If the doors appear this way, use the instructions in the previous section to check the leveling.

The doors are designed to be slightly different heights when the refrigerator is empty, in order to account for the weight of food that will be placed on the doors. If the doors are still not aligned after checking the leveling and loading the refrigerator with food, follow the steps below to adjust the door alignment.

1.Locate the alignment screw on the bottom hinge of the refrigerator door. See Graphic 9.

2.Use a ⁵⁄₁₆" wrench to turn the screw. To raise the refrigerator door, turn the screw to the right. To lower the door, turn the screw to the left.

3.Check that the doors are even at the top and bottom. If necessary, continue to turn the alignment screw until the doors are aligned.

4.Replace the base grille.

NOTE: Be sure to refasten the Tech Sheet behind the base grille.

Handle Installation and Removal

PARTS INCLUDED: Door handles (2), ¹⁄₈" hex key, spare setscrew(s)

To Install the Handles:

NOTE: The handle mounting setscrews are preinstalled in the handle.

1.Remove the handles, which are packed inside the refrigerator.

NOTE: To avoid scratching the finish, place the handles on a towel or other soft surface.

2.Open the freezer door. On the refrigerator door, place the handle on the shoulder screws with the setscrews facing the freezer.

A

B

A. Shoulder screws

B. Setscrews inside the handle

3.Firmly push the handle toward the door until the handle base is flush against the door.

4.While holding the handle, insert the short end of the hex key into the upper hole and slightly rotate the hex key until it is engaged in the setscrew.

5.Using a clockwise motion, tighten the setscrew until it begins to contact the shoulder screw.

6.Repeat steps 4 and 5 to begin fastening the lower setscrew.

7.Once both setscrews have been partially tightened as outlined in the previous steps, fully tighten both the upper and lower setscrews.

IMPORTANT: When the screws feel tight, tighten them an additional quarter-turn. The handle is not properly installed without this extra tightening.

8.Open the refrigerator door and close the freezer door. Repeat steps 2 through 7 to install the other handle onto the freezer door with the setscrews facing the refrigerator.

9.Save the hex key and all instructions.

To Remove the Handles:

1.While holding the handle, insert the short end of the hex key into the lower setscrew hole and slightly rotate the hex key until it is engaged in the setscrew.

2.Using a counterclockwise motion, loosen the setscrew a quarter-turn at a time.

3.Repeat steps 1 and 2 for the upper setscrew. Gently pull the handle away from the door.

4.If necessary, use a Phillips screwdriver to remove the shoulder screws from the door.

6

Page 5 Page 7
Page 6
Image 6
Amana ASD2575BRW Handle Installation and Removal, To Install the Handles, To Remove the Handles, Door Alignment
Page 5 Page 7

ASD2275BRW, ASD2575BRB, ASD2275BRB, ASD2575BRS, ASD2275BRS specifications

The Amana refrigerator models ASD2575BRW, ASD2275BRS, ASD2575BRS, ASD2275BRB, and ASD2575BRB stand out in the competitive kitchen appliance field, combining utility and sleek aesthetics. These side-by-side refrigerators are designed to cater to modern needs, offering a blend of style, advanced technology, and thoughtful features.

One of the main attractions of these Amana models is their spacious interior layout, making them ideal for families and individuals with busy lifestyles. They offer generous storage space with adjustable shelves that allow users to customize their storage configurations. The shelves are constructed from durable materials, easy to clean and maintain while ensuring they can accommodate large items like tall bottles or bulky containers.

These refrigerators also feature a dual evaporator system for optimal food preservation. This technology allows separate cooling systems for both the refrigerator and freezer compartments, thus reducing the risk of odor transfer and maintaining ideal humidity levels. The Fresh Food section is designed to keep fruits and vegetables crisp, while the freezer maintains low temperatures for long-lasting food preservation.

Energy efficiency is another hallmark of these Amana models. They are equipped with energy-saving features, such as LED lighting and a high-efficiency compressor, which help reduce overall energy consumption without sacrificing performance. These eco-friendly elements not only save money on utility bills but also contribute to a more sustainable lifestyle.

Convenience features are abundant as well, with adjustable door bins that provide flexible storage options and an external water and ice dispenser that offers easy access to chilled water and ice cubes. This saves time and adds a layer of practicality to daily routines.

Additionally, these models offer a sleek finish available in various colors, enhancing any kitchen decor. The fingerprint-resistant stainless steel options ensure that the surface remains clean and attractive over time.

In conclusion, the Amana ASD2575BRW, ASD2275BRS, ASD2575BRS, ASD2275BRB, and ASD2575BRB refrigerators are designed for those who prioritize functionality without compromising style. Their advanced features, coupled with an energy-efficient design, make them an excellent choice for modern households looking to streamline their kitchen experience while keeping food fresh and organized.
Top Page Image Contents