Operation
Instructions
To reduce the risk of fire, electric shock, serious injury or death to persons, read the IMPORTANT SAFETY INSTRUCTIONS, Pages 4 and 5, before operating the dryer.
To Dry Clothes
IMPORTANT: Please read instructions before using dryer. Before using dryer for the first time, wash out the inside of the dryer cylinder with a sudsy cloth, then wipe dry. Install the dryer according to the INSTALLATION INSTRUCTIONS. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1.CLEAN LINT FILTER after each use.
2.LOAD DRYER. Open dryer door. Shake out laundry and place in dryer.
3.CLOSE DOOR. Dryerwill not operate with the door open.
4.SELECT drying temperature: The FABRIC SELECTOR
controls the drying temperature.
FABRIC SELECTOR
IMPORTANT: The heat on the
DELICATE setting is not sufficient to remove wrinkles from
permanent press.
5.SELECT TIMER SETTING in
cycle desired: AUTOMATIC PERMANENT PRESS/KNITS, AUTOMATIC REGULAR,
AUTOMATIC DELICATE, TIME DRY or NO HEAT.
These cycles control the drying time.
The Energy Saver settings, marked with a dot (.), show which
dryer settings will use the least energy.
6.START DRYER: Push the timer knob in.
TO STOP DRYER AT ANY
TIME, open door or turn timer knob to an OFF position.
TO RESTART DRYER, close
door, reset timer if necessary, and push the timer knob in. Your dryer is designed so that it will not operate if the door is open.
7.SET SIGNAL CONTROL: Rotate selector to "loud" (loudest sound) or to "off" (no
sound) or to any level in between.
In the Automatic Permanent Press/Knits cycle, the signal
will buzz for a short period of time at the end of cool down. If
clothes are not removed at
that time, the timer will advance into the Cool Tumble
cycle, where the signal will buzz for a short period of time for every five minutes of the 15 minute cycle before dryer stops.
In the Automatic Regular, Automatic Delicate, Time Dry and No Heat cycles, the
signal will buzz for a short period of time at the end of the cool down.
The signal will stop when the door is opened, or when the timer is advanced to an OFF
position,
SIGNAL
LtlJ
©
NOHEAT
I
©
REGULAR
NO HEAT
Control Panel Light
An optional control panel light kit is available for your dryer. This kit will
provide additional light to your control panel and improve visibility of the controls in a dimly lit environment.
To order the Control Panel Light
Kit (Part No. LFLI) contact your dealer. For more information call
10 | 503276 |
