Using the Controls - Auto Dry Models
STEP 1
Select Temperature
In order to select the correct temperature, turn the Temperature control to one of four choices; Regular, Medium (select models), Delicate or Air Fluff.
DRYER TEMPS | LOAD TYPE |
|
|
Regular | Sturdy cottons or labels marked |
| Tumble Dry. |
|
|
Medium | For |
(select models) | synthetics and lightweight cottons |
| labeled Tumble Dry Medium. |
|
|
Delicate | For heat sensitive items labeled |
| Tumble Dry Low or Tumble Dry |
| Medium. |
|
|
Air Fluff | Items which need freshening. |
| Load tumbles with room |
| temperature air. |
|
|
STEP 2
Select Options
End of Cycle Signal
When the cycle is complete, a signal will sound. The signal can be canceled by turning the switch to Off.
Remove load immediately to reduce wrinkling.
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired setting. When using an Auto Dry Regular cycle, the control dial should point between More Dry and Less Dry for most loads.
Loads of larger or bulkier size may require the More Dry setting to completely dry the load. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Extended Tumble (select models)
Extended Tumble is provided to minimize wrinkles in the Auto Dry No Iron Fabrics cycle. This feature provides an extra 60 minutes of unheated tumble action at the end of the cycle. Clothes can be removed any time during this portion of the cycle.
The additional 60 minutes of unheated tumbling can be canceled by turning the switch to Off.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most cottons and linens. At the end of the cycle, the clothes are cooled to reduce wrinkling for approximately
10 minutes.
Auto Dry No Iron Fabrics
The Auto Dry No Iron Fabrics cycle is designed to dry
3
