To Convert Surface Burners

1.Remove burner grate, burner caps and burners.

A

B

A. Burner cap

B.Burner

2.Locate LP gas orifice spuds for top burners in the literature bag included with the range. Three LP gas spuds are stamped “88” and one “96.”

3.Remove Natural gas orifice spuds using a 7 mm combination wrench.

4.Install LP gas orifice spuds using a 7 mm combination wrench.

A

B

A.Spud

B.Holder

NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 Power™ burner. Spud size and location remain the same.

For models with 4 standard burners:

Std burner 88

Std burner 88

Std burner 88

Std burner 88

For models with 3 standard burners and 1 Power™ burner:

Std burner 88

Std burner 88

Power™ burner 96

Std burner 88

5.Place the Natural gas orifice spuds in the parts bag for future use and keep with the bag containing literature.

6.Reinstall burners, burner caps and burner grates.

To Convert Oven Burner

1.Open the oven door and remove oven racks, oven tray, flame spreader and set aside.

2.Lift oven burner. The orifice spud is behind the oven burner air shutter.

A

B

A. Oven burner

B. Air shutter

3.Locate LP gas orifice spud stamped “56” in the bag containing literature supplied with the range.

4.Use a ³⁄₈" combination wrench and remove the Natural gas orifice spud.

5.Install the number “56” LP gas spud. IMPORTANT: Do not overtighten.

A

A. LP oven orifice spud stamped with “56”

6.Place Natural gas oven burner spud in plastic parts bag along with Natural gas cooktop burner spuds for future use and keep with the bag containing literature.

7.Reinstall oven burner.

8.Reinstall oven racks, oven tray and flame spreader.

13

Page 13
Image 13
Amana W10130752B installation instructions To Convert Surface Burners, To Convert Oven Burner