INSTALLATION INSTRUCTIONS

Unpacking

WARNING

Excessive Weight Hazard

Use two or more people to move and install freezer. Failure to do so can result in back or other injury.

Remove Packaging Materials

■Remove tape and glue residue from surfaces before turning on the freezer. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your freezer. For more information, see “Freezer Safety.”

When Moving Your Freezer:

Your freezer is heavy. When moving the freezer for

cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the freezer straight out when moving it. Do not wiggle or “walk” the freezer when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the packaging materials, clean the inside of your freezer before using it. See the cleaning instructions in “Freezer Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from freezer.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: Do not install the freezer near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 40°F (5°C).

Check the strength of the floor before installing your freezer. It should hold the weight of a freezer fully loaded with food.

Allow at least 3" (7.5 cm) of air space at the top and on both sides of the freezer and 1" (2.5 cm) between the back of the freezer and the wall. If the freezer is to be against a wall, leave extra space on the hinge side so the door can open wider.

NOTE: This freezer may be installed side by side with another refrigerator or freezer. Allow for a 3" (7.5 cm) clearance at the top and sides and a ¹⁄₄" (0.64 cm) clearance between the appliances.

3" (7.5 cm)

3" (7.5 cm)

4

Page 3 Page 5
Page 4
Image 4
Amana W10326797A manual Installation Instructions, Unpacking, LocationRequirements, Remove Packaging Materials
Page 3 Page 5

W10326797A specifications

The Amana W10326797A is a high-quality washer/dryer combo that combines efficiency, versatility, and advanced technology to cater to modern laundry needs. Designed to fit seamlessly into various kitchen and laundry configurations, this appliance stands out for its performance and user-friendly features.

One of the main highlights of the Amana W10326797A is its spacious capacity, allowing users to tackle large loads of laundry effectively. With ample space inside the drum, families can wash larger items, such as blankets and comforters, without requiring multiple cycles. This convenience not only saves time but also enhances the overall laundry experience.

The washer/dryer combo employs advanced cleaning technologies designed to deliver thorough and gentle washing. With multiple wash cycles, users can choose the right setting for their fabric types, ensuring optimal care and longevity of their garments. The machine also features a robust spin cycle that efficiently removes excess water from clothes, reducing drying time and saving energy.

Energy efficiency is a significant characteristic of the Amana W10326797A. It utilizes innovative technologies to minimize water and electricity consumption without compromising on performance. This not only benefits the environment but also leads to reduced utility bills, making it a smart choice for budget-conscious households.

Another standout feature is the intuitive control panel, which provides easy navigation through the various settings and options available. LED indicators and clear labels guide users in selecting the right cycle and managing their laundry tasks with ease. Additionally, the delay start option allows users to set the machine to begin washing or drying at a more convenient time, enhancing flexibility.

Durability is also a key aspect of the Amana W10326797A. Built with high-quality materials, this appliance is designed to withstand the rigors of regular use while maintaining performance over the long term. The stylish design adds a modern touch to any laundry area, making it not only a practical appliance but also an aesthetic one.

In summary, the Amana W10326797A combines a spacious capacity, versatile washing options, energy efficiency, and user-friendly controls, making it a noteworthy choice for those looking for an effective washer/dryer combo. Its durable construction and modern design further enhance its appeal, ensuring it meets the demands of contemporary lifestyle while providing exceptional laundry care.
Top Page Image Contents