WPS-enabled wireless access point, then click ‘Connect’ to establish connection to selected access point, if there are more than one WPS-enabled access point found. You can also click ‘Rotate’ button, and next access point on the list will be selected to establish connection.

If you want to delete a found access point from the list, select it and click ‘Delete’ button.

2-7-2 WPS Setup - PIN

If the wireless access point you wish to connect supports PIN, please follow the following instructions to establish connection to it:

Right-click the Ralink configuration utility icon located at lower-right corner of computer desktop and then click ‘Launch Config Utility’.

Click ‘WPS Configuration’ menu, and the following settings will appear.

The PIN code of your wireless network dongle is an eight-digit number located at the upper-right position of configuration utility. Remember it, and input the number to your wireless access point as the WPS PIN code (Please refer to the user manual of your wireless access point for instructions about how to do this).

NOTE: If you experienced problem with the pin code provided here, you can click ‘Renew’ to get a new pin code.

Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access point with correct PIN code is found, you’ll be connected to that access point.

You may have to click ‘PIN’ for few more times to try again. If you still cannot connect to access point by this way, please make sure the PIN code you provided to access point is correct.

There are also some options available for WPS configuration:

WPS associate IE: Check this box to send the association request with WPS IE during WPS setup. This is optional and you can use default value if you don’t know what will be affected.

WPS probe IE: Check this box to send the WPS probe request with WPS IE during WPS setup. This is optional and you can use default value if you don’t know what will be affected.

Auto: When in PIN mode, wireless access point to be connected will be selected automatically if this box is checked.

2-8 Radio On/Off

You can switch the wireless radio transceiver on and off by the utility, so if you want to disable wireless network function, you don’t have to remove the network dongle physically.

Right-click the Ralink configuration utility icon located at lower-right corner of computer desktop and then click ‘Launch Config Utility’.

To switch wireless radio on/off, please click ‘Radio On/Off’ button.

2-9 About

The ‘About’ tab provides you the information about version number of the configuration utility, driver, and other important information about your wireless network dongle.

Right-click the Ralink configuration utility icon located at lower-right corner of computer desktop and then click ‘Launch Config Utility’.

Click ‘About’ tab, and the following information will appear.

2-10 On-line Help

If you need to know the directions of how to use specific function in the utility, please click ‘Help’ button. Online help documents will be presented in Windows help format.