Here are descriptions of every setup item:

 

Item Name

 

 

Description

 

 

SSID

 

 

Please input the SSID (the name used to identify this wireless access point) here. Up to

 

 

 

 

32 numerical characters can be accepted here, excepting space.

 

 

Channel

 

Please select the wireless channel you wish to use. The number of channels available

 

 

 

 

 

here will vary depends on the setting of ‘Country Region Code’.

 

 

Wireless Mode

 

Select the operation mode of the access point here.

 

 

Use Mac Address

 

 

Click this button to use the MAC address of the wireless dongle as SSID. A prefix ‘AP’

 

 

 

 

will be added automatically.

 

 

 

 

 

 

 

Security Setting

 

 

Set the security options (wireless data encryption). Please refer to chapter 3-2 ‘Security

 

 

 

 

 

Settings’ for details.

 

 

Country Region

 

 

Please select the country code of the country or region you live. Available options are 0-

 

 

Code

 

 

7, which will affect the available wireless channels you can use: 0: FCC (US, Canada,

 

 

 

 

 

and other countries uses FCC radio communication standards) 1: ETSI (Europe) 2:

 

 

 

 

 

SPAIN 3: FRANCE 4: MKK 5: MKKI (TELEC) 6: ISERAL (Channel 3 to 9) 7: ISERAL

 

 

 

 

 

(Channel 5 to 13) Please note that only change the country code if you are in

 

 

 

 

 

different country. For example: when operating this product in US, only channels

 

 

 

 

 

1~11 can be operated. Selection of other channels is not permitted under FCC

 

 

 

 

 

regulations.

 

 

No forwarding

 

 

Check this box and wireless clients will not be able to share data with each other.

 

 

among wireless

 

 

 

 

 

clients

 

 

 

 

 

Hide SSID

 

 

Check this box and the SSID will not be broadcasted to the public. Your wireless clients

 

 

 

 

 

must know the exact SSID to be able to connect to your computer. This option is useful

 

 

 

 

 

to enhance security level.

 

 

Allow BW 40

 

 

Check this box to allow BW 40MHz capability.

 

 

MHz

 

 

 

 

 

 

 

 

 

Tx BURST

 

 

Check this box to accelerate the data transmit rate. It may not work with all wireless

 

 

 

 

 

access point and wireless devices.

 

 

Beacon(ms)

 

You can define the time interval that a beacon signal should be send. Default value is

 

 

 

 

 

100. Do not modify this value unless you know what will be affected.

 

 

TX Power

 

 

You can select the wireless output power here. Please select a proper output power

 

 

 

 

 

setting according to your actual needs. You may not need 100% of output power if other

 

 

 

 

 

wireless clients are not far from you.

 

 

Idle Time

 

 

Select the idle time for the wireless access point. Default value is 300. Do not modify this

 

 

 

 

 

value unless you know what will be affected.

 

To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all values to factory default value.

3-2 Security Setting

This wireless dongle supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to enhance data security level. It’s recommended to enable data encryption unless you wish to open your computer (and its internet connection) to the public.

When you click ‘Security Setting’ in the utility, the following window will appear:

Here are descriptions of every setup item: