Dehumidify, Fan mode, Sleep mode, Timer on function

Dehumidify

1. Press the MODE button until the dehumidify symbol appears.

2. Set the desired temperature with the up and/or down -button.

3.The FAN SPEED button does not work in dehumidify mode. The fan speed will always be low in this mode.

1. Press the MODE button until the fan symbol appears. 2. Set the desired temperature with the up and/or

down -button.

3. Use the FAN SPEED button to set the fan speed.

1.	Press the SLEEP button to reduce the noise level of the air
	flow from the inside unit. Cancel the sleep mode by pressing
	this button again.
2.	Fan speed is set to low, pressing the FAN SPEED button will
	deactivate the sleep mode.
3.	When sleep mode is activated, the symbol will be visible in the display.

1. Press the AUTOSTART button to set the ON-timer, will be displayed.

2. Press the HOUR button to set hours.

3. Press the MIN button to set the minutes in intervals of 10 minutes.

Once the set time has elapsed, the appliance will switch itself on. Press the AUTOSTART button again to cancel the timer on function.

1. Press the AUTOSTOP button to set the OFF-timer during

operation, will be displayed. 2. Press the HOUR button to set hours. 3. Press the MIN button to set the minutes in intervals of

10 minutes.

Once the set time has elapsed, the appliance will switch itself off. Press the AUTOSTOP button again to cancel the timer off function.

Timer on and timer off can be used in combination . The function for which the set time is reached first will be performed.

Note: the timer function can only be activated if the current time has been set.