Drainage
During the process of cooling, some water will be extracted from the air into the unit. Most of this water is used to cool the unit and make it run more efficiently. This is a feature not found in most Portable Air Conditioners. If the unit is operated in VERY HUMID air, water will collect in the container inside the unit. If the Internal Water Container is full, the Full Water Indicator will flash, the unit will shut off, and
it must be drained before it will
How to Drain the Unit
Use a Shallow Container or Dish
1.Turn off the unit.
2.Position a flat container or dish under the drain hole. Do not allow the water to drip continuously into the container, as it might easily overflow.
3.Remove the drain knob & rubber plug from the drain hole.
The condensed water will drain out automatically.
4.When the container is almost full, replace the rubber plug into the drain hole to stop the water. Empty the container.
5.Repeat steps 2, 3 & 4 until all the condensed water is emptied.
6.Once all the condensed water has been removed, replace the rubber plug into the drain hole firmly. The Full Water indicator should be off now.
7.Replace the drain knob.
8.Turn unit on, the unit will resume working.
Specifications
Model Number | ALD 12000M |
Cooling Capacity | 12,000 BTU/hr |
Heating Capacity | N/A |
Power Consumption | 950W / 8.4A |
Humidity Removal Capacity | 65 Pts. / Day |
Recommended room size* | Up to 400 sq. ft. |
Power Supply | 115V / 60Hz / 1 Phase |
Compressor | Rotary |
Refrigerant | |
Fan Speed | 2 |
Timer | |
Temperature Set Range | 62° F - 90° F |
Unit Weight | 65 lbs. |
Dimensions | 16"W x 17"D x 30"H |
Working Temperature | Cooling: 62° F to 110° F |
REMARKS:
The cooling capacity of the unit may be affected by the height of the ceiling, quality of insulation, number of windows, etc.
10 | 3 |