GB

Air flow

On the moment the air conditioner is connected to the mains, the louvres open and close and stay closed.

When the ON-button is pressed, the louvres open to maximum and return to an angle of 75° above the upper plane of the louvres housing.

Press the -button, the louvres will swing continuously up and down between 30° and 80° above the upper plane of the louvres housing.

By pressing the -button again the movement will stop and the louvres remain in that position. The direction of the air flow is then constant.

When the OFF-button is pressed, the louvres close.

This way of directing the air flow is particularly convenient when using the remote control: a user friendly approach to your comfort.

In order to direct the air flow to a lower angle, raise the louvres housing by pulling it up only by the centre of its back rim.

Air outlet down,

Air outlet up,

Raising the

louvres closed

louvres opened

louvres housing.

Sleep mode

The sleep mode function adjusts the set temperature of the unit to the thermal needs of the body falling asleep as follow:

Default fan speed: LOW

Press the -button to operate the sleep mode. Press the -button again in order to cancel the sleep mode.

The set temperature will increase 1°C after 1 hour and a further 1°C after 2 hours.

No FAN mode under SLEEP mode operation.

Dehumidification

If the unit will be used mainly as a dehumidifier just let the warm air return in the room. Continuous drainage (see separate chapter) is then necessary and more efficient.

9

Page 9
Image 9
Amcor CPLM 12KE-B-410, CPLM 9KE-B-410, CPLM 15KE-B-410 manual Air flow, Sleep mode, Dehumidification