Operation
Timer
The TIMER function allows you to program the time the unit turns on and turns off.
TO SET THE TIMER:
•Press the TIME button briefly, the 2 hour digits will flash.
•Press the UP or DOWN button to adjust the hour.
•Press the TIME button again. The 2 minute digits will flash.
•Press the UP or DOWN button briefly to adjust the minutes.
•The TIME is set. After 10 seconds the time display returns.
Programming the Timer for ON:
•Perform the standard steps as described above. The linear time scale will be on between the ON programmed times until 24:00.
The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes until it reaches the ON timer time, then the black segments in the linear time scale will disappear.
Programming the Timer for OFF:
OFF ON
Timer Example
•Perform the standard steps as described above. The linear time scale will be on between the present time to the OFF programmed time. The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes until it reaches the OFF timer time, then the black segments in the liner time scale will disappear.
10
