Maintenance
Always unplug the unit from the wall before performing any maintenance.
•Make sure the unit is drained before moving.
Cleaning the Unit:
•Only use a soft damp cloth.
•Never use chemicals,
Cleaning the Upper Filter:
•Slide out the filter holder from the unit.
•Separate the filter fixer from the filter holder (see fig. 1).
•Remove the active carbon filter (black) and slide out the 3M™ High Air Flow filter (white).
•To clean filters, vacuum with standard vacuum cleaner.
•Insert the active carbon filter into the filter holder (see fig. 2).
•Insert the 3M™ High Air Flow filter into the filter holder (see fig. 3).
•Fix the filters by reassembling the fixer into the filter holder (see fig. 4).
Cleaning the Lower Filter:
• Vacuum with standard vacuum cleaner.
NOTE:
•Before storage be sure filters are clean and dry.
•Should you need to replace filters, contact Amcor for replacement.
•The screen filter must always be used.
•The 3M™ High Air Flow filter should be cleaned periodically. Both filters can be vacuumed.
IMPORTANT: NEVER operate the unit without a filter.
End of Season Storage:
•Unplug the unit.
•Drain the condensed water COMPLETELY.
•Clean the upper and lower filter.
14