Chapter 4 Reference

Troubleshooting

Remote does not work.

Replace batteries (size AAA).
The USB receiver may not be detected by your system. Try another USB port.

Remote control works sporadically.

Check batteries.
Check the line of sight to the USB receiver.

International Compliance Information

This section details the worldwide compliance information for this product,
which is manufactured to be compliant in the regions where it is sold.

FCC Compliance Information

This product complies with FCC Rules part 15. Operation is subject to the
following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with manufacturer's
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.