LE-363 User’s Manual Hardware Setup
LCD Installation Guide: 1. Preparing the LE-363, LCD panel and the backlight inverter.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper JVLCD to +5V or +3.3V.
3. If your panel is for TTL interface, you would need a TTL type cable.
Board side
Panel side
For sample illustrator only
4. IF your panel is for LVDS interface, you would need a LVDS type cable.
Board side
Panel side
For sample illustrator only
5. To connect all of the devices well.
Onboard Display Interface
24