To setup the LCD, you need the component below:
1.A panel with LVDS interfaces.
2.An inverter for panel’s backlight power.
3.A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1.Preparing the LE-366, LCD panel and the backlight inverter.
2.Please check the datasheet of the panel to see the voltage of the panel, and set the jumper JP1 to +5V or +3.3V.
3.You would need a LVDS type cable.
Panel side | Board side |
| For sample illustrator only |
4. To connect all of the devices well.
